Click on the Print button to print the selected picture. You will see in the progress area as data is transferred (it takes longer with slower connection speed). When it is done the following screen pops up:
Set the width and the height of the picture you want to print.
This settings depend on the image dimensions and on the photo paper you use in the printer, and also on which direction the photo paper is placed into the paper tray. Lets's assume that you use 6" x 4" size photo paper and it is placed horizontally into the tray. When the width of the image is larger than the height of the image the width=6 and height=4 settings will be correct. Otherwise you will need to place the photo paper 90 degrees turned into the tray and enter width=4 and height=6. When the image proportions are not exactly 6 x 4 (using the example) the image will be sized to fill in either the width or the height (whichever gives a better fit) and the other dimension will be less than the size of the paper, so a margin will appear. Leave the left side and the top margin values zero to automatically center the picture on the paper. Entering non-zero value into either of these fields will cause the picture being shifted to right and/or to down.
The available printers are listed at the left-bottom part of the dialog. The default printer will automatically be selected. Click on another printer when not the default printer is to be used.
When everything is set click on the Print button.
